QuiqLiteX

QuiqLiteX Red/White LED is a rechargeable flashlight/uniform light that provides between 20 - 75 lumens of light output. QuiqLiteX with red/white LED was designed to be used for normal reading, writing and maneuvering in the dark without impairing night vision and without the need to hold the flashlight with your hands.

QuiqLiteX gives you light when and where you need it most, HANDSFREE!

You're on a job and it's dark. Your only light source is a flashlight... You turn it on but need to be able to work quickly and efficiently with both hands. You desperately put the flashlight in your mouth to direct the light where you need it, at the same time saliva starts to run down the body of the flashlight... Yes, we've all been there!

Quiqlite is the solution to these problems!
Being able to work unhindered with both hands, while getting work light where you need it most is simply priceless!

The Quiqlite light integrates with your uniform so the light falls where you need it to see and work.

The lamp has a sleek and low profile and is taken as an integral part of your uniform or work garment.

The first press of the switch turns the lamp on and activates 1 white LED and you get 20 lumens of light output and it's dim enough for you to maintain night vision, while being bright enough for you to see better at close range. Press again and the white LED goes out and is replaced by the red LED.

If you need more light, press the X-BOOST button again! You now get a full 75 lumens of light output instead from the white LED.

QuiqLiteX is equipped with a 10 minute auto-off timer that ensures the light shuts off and doesn't run out of battery unnecessarily.
QuiqLiteX also has a strobe mode. This mode is activated by holding the power switch for 2 seconds. The strobe mode has no auto shut-off.

With your QuiqLiteX you also get a so-called QuiqFlare that spreads the light in a diffuser, making you visible at distances of over 1.5 km!

QuiqLiteX also has a pipill meter on the back.

Light features

White/red LED On/Off button

1st press - Activates 1 white LED providing 20 lumens (10 min auto off).
2nd press - Activates instead 1 red LED providing a total of 20 lumens (10 min auto off).
3rd press - Turns off all LEDs.

X-BOOST Button - Located on the back.

1st press - Increases the brightness of the white LED from 20 to 75 lumens.
2nd press - Dims the brightness back to 20 lumens.

Safety Strip

Press and hold the main power switch for 2 seconds. No automatic shut-off.
Press the button again to turn off the strobe function.

General features

• 4 light modes
  :White solid light: 20 / 75 lumens light output.
  Red solid light: 20 lumens light output.
  White strobe: 75 lumens.
  
  
  
• Very bright LED.
  
• X-BOOST button
• Possibility to switch on one or both LEDs.
• Anti-reflection visor.
• 10 min auto power off.
  
• 180 degree adjustable light arm.
• 360 degree rotating magnetic clip, removable.
• Weather-resistant nylon housing.
• QuiqFlare Light Diffusor Attachment
• Pupil Meter.

Charging

QuiqLiteX is charged using a micro USB port located on the left side of the lamp. QuiqLiteX is very flexible to charge as all you need is a USB socket capable of supplying at least 5 volts.

CHARGING - Red LED lights constantlyCharging
- Red LED flashes

It takes about 2 hours to fully charge the lamp when the battery is completely empty.

The box contains

• QuiqLiteX.
• QuiqFlare.
• 2 Lithium CR2032 batteries (replaceable).
• Removable magnetic QuiqClip.
• Micro-USB charging cable.
• User manual (in English).

Specifications

Light modes: Red LED 20 lumens (5 hours), White LED 20 lumens (15 hours), 75 lumens (5 hours).
Strobe: 10 lumens (40 hours).
Material: nylon / aluminium Battery
: 1 QuiqLiteX Lithium (included) Part# 052042Length
: 7.62 cmWidth
: 2.29 cmWeight
: 39.5 g (incl. battery)