QuiqLite

X2 Red/White LED - Rechargeable

QuiqLiteX Red/White LED is a rechargeable flashlight/uniform lamp made of aircraft aluminum and providing between 20 - 200 lumens of light output. QuiqLiteX with Red/White LED was designed to be worn concealed and used for reading, writing and maneuvering in the dark without impairing night vision and without the need to hold the flashlight with your hands

.

QuiqLiteX2 gives you light when and where you need it most, HANDSFREE!

You're on a job and it's dark. Your only source of light is a flashlight... You turn it on but need to be able to work quickly and efficiently with both hands. You desperately put the flashlight in your mouth to direct the light where you need it, at the same time saliva starts to run down the body of the flashlight... Yes, we've all been there!

Quiqlite is the solution to these problems!
Being able to work unhindered with both hands, while getting work light where you need it most is simply priceless!

The Quiqlite light integrates with your uniform so the light falls where you need it to see and work.

The light has a sleek and low profile and is taken as an integral part of your uniform or work garment.

With your QuiqLiteX2 you also get a so-called QuiqFlare which diffuses the light in a diffuser making you visible at distances of over 1.5 km

!

Light properties

Tactical red LED

1st press - Activates 1 red LED providing 20 lumens (20 min auto shut off)
2nd press - Turns off the red LED after 2 seconds delay.

White LED

1st press - Activates 1 red LED providing 20 lumens (20 min auto off).
2nd press within 2 seconds - Turns off red and activates white LED (20 lumens (20 min auto off).
3rd press - Turns off the white light so that the lamp goes out.

Power Boost - White LED

Activate the white light first. Double press on/off button.
Brightness is increased from 20 to 100 lumens.
Double press again and the light output increases from 100 to 200 lumens!
Double press a third time and the light output returns to the minimum value of 20 lumens.
X2 always starts at 20 lumens after the lamp has been switched off.

Even the Power Boost mode has an automatic shut-off after 20 minutes so that the battery is saved in case you forget the lamp in on mode.

Safety Strobe

Activate red light. Then press and hold the power button for 2 seconds. No automatic switch-off.
Press the button again to switch off the strobe function.

General features

• 5 light modes
  :White solid light: 20 / 100 / 200 lumens light output.
  Red solid light: 20 lumens light output.
  White strobe: 100 lumens.
  
  
  
• Very bright LED.
  
• Anti-reflection visor.
  
• 20 min auto shut-off.
  
• 160° adjustable light arm.
• 360° rotating magnetic clip, removable.
• Magnetic body.
• IPX4 certified.
• QuiqFlare Light Diffusor Attachment.

Charging

QuiqLiteX is charged using a micro USB port located on the left side of the lamp. QuiqLiteX is very flexible to charge as all you need is a USB socket capable of delivering at least 5 volts.

CHARGING - Red LED lights constantlyCharging
- Red LED flashes

It takes about 2 hours to fully charge the lamp when the battery is completely empty.

The box contains

• QuiqLiteX2.
• QuiqFlare.
• Removable magnetic QuiqClip.
  
• Micro-USB charging cable.
• User manual (in English).

Specifications

LED: Red/White with 50 000 hours of burn time.
White LED: 20 / 100 / 200 lumensRed
LED: 20 lumensStrobe
: 100 lumensBattery life
: 200 lumens = approx 45 min / 20 lumens = approx 5 hours.
Material: non-reflective aluminiumBattery
: 1 rechargeable Lithium Ion 380 mAh.
Length: 7,94 cmWidth
: 2,40 cmWeight
: 49 g (without clip attached)