Snigel Squeeze West

Squeeze Vest from Snigel is a vest that fits tightly and comfortably on the body. The Squeeze Vest is designed to be easy to wear, adjust and use. It will not restrict your movements and is designed to be as cool as possible.
The vest is available in three different sizes.
The parts of the vest can be combined in many different ways depending on the mission, climate and threat.

• Can be closed with a zipper or Velcro. Purchase zipper closure separately HERE and Velcro closure HERE. 
• The Squeeze vest is easy to adjust in length and width, even when worn.
• In the front and back there are holders for ballistic panels and hard plates.
• Compatible with MOLLE on both front and back.
• At each shoulder there are two attachment points for our repair buckles. With these you can attach a mission backpack directly to the plate carrier, so you don't have the shoulder straps from the backpack tightening.
• There are also two attachment points under the MOLLE straps on the chest for repair buckles. These can be used to attach the Squeeze belt with pockets.
• An elastic cord runs along the edge of the front. Here you can thread the fluid hose or cables if you need to.
• Around the shoulder straps you can attach the shoulder covers. These can hold cables, straps, cable ties, etc. There is an elastic cord on the side of the shoulder straps.
• The radio earpiece can be tucked under a flap in the shoulder sleeve when not in use.

NOTE Ballistic plates are purchased separately for the vest!

The product contains the following parts:
Squeezevest front
Squeezevest back
Right and left shoulder sleeve

NOTE! The zipper closure, the Velcro closure, the quick adjuster and the side panel pockets are sold separately.

Specifications

Snigel Squeeze vest:

Weight: approx. 1000 g

Material:
Fabric: 100% polyamide PU coated
Webbing: 100% polyamide or 100% polyester
Foam: Polyethylene

Manual in English